SQLite format 3 @ > h > -ικ ϋ ϋ WtableCategorysCategorysCREATE TABLE Categorys(ID integer PRIMARY KEY, Name text)/9tableDeviceDeviceCREATE TABLE Device(ID integer, Name text, GuiId text, Category integer, Helptext text, Script text, DP1Name text, DP1GUIType integer, DP1MinMaxDef text,DP1Default text, DP1Mask text, DP2Name text, DP2GUIType integer, DP2MinMaxDef text, DP2Default text, DP2Mask text, Manufactor text, Spare1 text,Spare2 text,Spare3 text,Spare4 text,Spare5 text,Spare6 text,Spare7 text,Spare8 text,Spare9 text,Spare10
V V υj3
Χ'/
E2 v1.30Tested on E2 Revision 3.1
Driver Version V1.4, May 2016
Default IP Address: 192.168.0.175
XML Communication Port: 9876
E2 works in frames and not in seconds for a transition. There are 4 different Transition Times you can set (Screen,Aux,Layer,Move) so be carefull to set it in the right place!
There are 2 Ports to communicate with the E2. You can use 9876 for this XML Driver or you can use the E2 Telnet driver on Port 9878 (telnet) to send Trans and PRESET to the machine.
To edit Presets in the System you need the Preset ID! This isn't realy easy to find out, because every time you press save it would be increase by 1 and this number has nothing to do with the GUI slot, where it would be moved after the save process!
To recall on a different route, you can use Telnet on another Port (9878) with the old E1 commands with minor changes in the writing (for example PRESET A
,$ hϋφρμηβέΨΣΞΙΔΏΊ΅°«¦‘~ytoje`[VQLGB=83.)$ i+ ;O
%
RouteBackgroundToScreendim M,sysid,destmgrid,destid,source,layer,matte as string
m = """"
sysid=DP1
destid=P1
destmgrid="0"
layer=P3
source=P4
//fuer matte
if P2 = "Source" then scriptresult = "0"+source+""+chr(10)+chr(13)
//fuer source
if P2 = "Matte" then scriptresult = "