Video System Manager Phillips Projects › Forums › V-Control General › Video System Manager Phillips Tagged: philips VSM This topic contains 1 reply, has 2 voices, and was last updated by Dierk 9 months, 1 week ago. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts December 20, 2016 at 19:17 #1380 gbParticipant Hi, We would like to integrate two Philips Video System Manager with V-Control3. We have them attached to a digital façade and the led system of the stairs at a cultural center. I am going to contact Philips to ask them about what kind of interfaces does this device have. What kind of information should we ask for? what are we looking for? The device has a frontal panel and a rj45. Thanks for the advice. Best regards Attachments:La-Cosa.jpg December 21, 2016 at 09:02 #1383 DierkParticipant You need to know the control protocol and the control interface and it’s parameters. If the device is controllable via RS232/422 or 485 you need to know the used baudrate, parity, stopbits etc. If it is controlled via Ethernet (TCP or UDP) you need to know the port. Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.