Test Remote Services with PUTTY – V-Control

This topic has 4 replies, 2 voices, and was last updated 2 years, 3 months ago by Dierk.

Log In Register Lost Password

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
July 4, 2019 at 18:02 #6456

atallon10
Participant

I would like to just send a TCP message to V-Control via the remote services. Does anyone know what syntax I need to use to send a scrRunTask command via PUTTY? I’ve tried the examples in the manual to no avail.

Regards,
Alex

July 4, 2019 at 18:39 #6458

Dierk
Participant

The problem is that you need to send non ASCII characters if you want to use the remote service. Here is a description hoe to do this

https://superuser.com/questions/759398/how-do-i-transmit-a-single-hexadecimal-value-serial-data-in-putty-using-an-alt-c

It might be easier if you create a new device and have an event that fires if a command is received,

https://v-control.com/wiki/doku.php/device_editor#events

With this event you can fill a device variable, and if that variable changes, you can call a task

https://v-control.com/wiki/doku.php/events

July 4, 2019 at 19:41 #6460

Dierk
Participant

Maybe this works

\x040\x05scrRunTask\x05MyTaskName\x06

July 5, 2019 at 18:56 #6485

atallon10
Participant

Thank you Dierk. I will try the Event suggestion. Allow me to also say how impressed I am with the amount of robust features included in V-Control and your quick responses in this forum. Thanks again!

Alex

July 7, 2019 at 11:50 #6524

Dierk
Participant

Hi Alex,

thank you, very nice to read that
Author

Posts

Log In Register Lost Password

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.