Starting show in middle

Home Forums V-Control General Starting show in middle

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #1520

    If in a show of say 20 min total time, if for some reason the show is stopped after 7 mins.
    Now if the problem is solved and one wants to start the show exactly at the point(time) it was stopped.
    is there any provision in V-control software to do this
    Can software remember where it was stopped OR can we fast forward the show to 7 min and play onwards


    There is no simple answer to this question. It depends how your V-Control project is organized.
    A simple solution could be that your whole show is in one cuelist (I do recommend this only if most of these cues are CallAsFunction cues).
    Then you can right click at the position you want to continue and select “Run from here”.

    Another solution could be to make an “interrupt task”. This task interrupt your show and stores all the values you need to continue in global variables.

    Then program a “continue task”. This task reads the values previously stored, and set up your show to the state it was at interruption.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.