Query Timecode position of Hyperdeck Home › Forums › V-Control General › Query Timecode position of Hyperdeck This topic has 1 reply, 2 voices, and was last updated 3 years, 3 months ago by Dierk. Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) Author Posts October 14, 2019 at 14:34 #9013 steve88Participant Hello, I am working on a project that will require tasks to be fired linked to the timecode of the file on the hyperdeck. I have been looking at the event script, and it seems like it may be possible to query the current timecode position and then fire events from this ? The project is not until December so there is still some time yet. Thanks October 15, 2019 at 10:57 #9033 DierkParticipant Hi Steve, if you can poll the TC of the file, then you can set up a monitor command that is polling the, TC let’s say every 40 ms, and push this value into a Device Variable. Then you can use this device variable as TC reference in a timeline. Author Posts Log In Register Lost Password Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In