[DRIVER] Barco Projector Extended

Home › Forums › V-Control Show Case › [DRIVER] Barco Projector Extended

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 9, 2015 at 16:13 #739
    JonasStade
    Participant

    i have updated the Barco Projector driver with Test Pattern ON/OFF (and +-10 patterns to select) and put in a Source select command. The beamer had 2 Boards, 1. DVI and 2. DUAL SDI. So the driver only includes DVI, SDI1 and SDI2. For other connection types it have to be upgraded again (possible in the future if i hade some with VGA or HDMI).

    For now, this is the result of my work 🙂
    Jonas

    Attachments:
    1. barco_driver_extended_V1.dr3
    2. barco_testproject.vc3
    November 9, 2015 at 16:13 #742
    Dierk
    Participant

    Hi Jonas,

    thank you for your updates. I added the Barco and Playback Pro driver to the device database, they will be available in the next release. Meanwhile one can download devices.rsd from Github if needed.

    Dierk

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.