Acknowledge Logging Mode / Window

Home › Forums › V-Control General › Acknowledge Logging Mode / Window

This topic contains 1 reply, has 1 voice, and was last updated by  steinhalion 10 months ago.

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 22, 2018 at 16:05 #1709

    steinhalion
    Participant

    hi

    Is there a Logging Window in v4 as we have it in v3 on the right side?
    I can’t find it in 4.0.3.

    I need to see the last Command sent to a panasonic projector (i.e. shutter …OSH:0 / … OSH:1, so i can verify that the shutter is opened or closed.
    The Command is triggered from a Mediaserver with GeneralOSC.

    Where can i see some kind of Errorlist (“channel is blocked” or “timeout”)?

    Is it possible to convert vc3 Projects (3.7.19) to vc4 Projectfile?
    I think it needs more than a change of the file extension?

    Thanks

    March 22, 2018 at 16:20 #1710

    steinhalion
    Participant

    ah! found it! log window was on external screen 🙂

  • Author
    Posts
Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.