Home › Forums › V-Control Show Case › [DRIVER] Barco PDS 902 Version 1.0 for Firmware 3.x › Reply To: [DRIVER] Barco PDS 902 Version 1.0 for Firmware 3.x
October 6, 2016 at 13:37
#1323
Participant
SO after I have to use my own driver in the last days I could say, it has a problem with the login command. When I have time, I will copy it from the ImagePro 2 Login, because this is working fine and it is the same engine.
The 100% working “Workaround” is to add in EVERY Task 3 RAW commands!
1. send “user” (without “”)
2. send “” (nothing without “”)
3. send “” (nothing without “”) (send it again)
and then it Works. The Raw command is on Number 100 or something like that!
Jonas