Reply To: Device Events

Home Forums V-Control General Device Events Reply To: Device Events


Hi Dierk,

in this case, the KissBox does not send a broadcast if another controlsystem changes the states, this only happens with input cards.
So I need to poll.

In your Example you send as “GetStatus” dezimal Value 10 instead of hex A0 or dez 160, so the Box does not answer. I changed this to dez 160, and in Wireshark I can see now, that the Box answers. But still no luck in V-Control.

See atached Screenshot from Wireshark.
Captur1 is the Request, Capture2 the Response.
In V-Control still no luck.

What about the fact, that the KissBox send a broadcast to IP-Adress Might this prevent V-Control from capture?