User Tools

Site Tools


options

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
options [2018/06/25 08:42]
admin
options [2018/06/25 08:44] (current)
admin
Line 24: Line 24:
  
  
-=== TCP Remote ===+==== TCP Remote ​====
 The TCP service can be used by any application that is capable to connect to a TCP Server and send the command strings as described in the Node Protocol chapter. The Port is 10101 by default an can be changed. Max Clients determines the maximum number of simultaneously connected clients. The check-box //Enable TCP Remote Service// starts the service. The TCP service can be used by any application that is capable to connect to a TCP Server and send the command strings as described in the Node Protocol chapter. The Port is 10101 by default an can be changed. Max Clients determines the maximum number of simultaneously connected clients. The check-box //Enable TCP Remote Service// starts the service.
  
Line 30: Line 30:
  
  
-=== UDP Remote ===+==== UDP Remote ​====
 The UDP Service uses the same protocol than the TCP Service. If both services used at the same time, it is necessary to use a different port. For that reason, the default UDP Port is 10102. The UDP Service uses the same protocol than the TCP Service. If both services used at the same time, it is necessary to use a different port. For that reason, the default UDP Port is 10102.
  
 {{:​options3.png|}} {{:​options3.png|}}
  
-=== HTTP Remote (Webserver):​ ===+==== HTTP Remote (Webserver): ​====
 V-Control comes with a build in web server. V-Control comes with a build in web server.
  
Line 42: Line 42:
 The HTTP Port is 80 by default. In this case it is sufficient to enter the IP address of the V-Control system in the browsers address field. If the web service is not available, check the firewall configuration of the computer or try another port. If  another port than 80 is used, the port number has to be added to the URL (e.g. http://​192.168.1.5:​8080) if Port 8080 is used alternatively. //Documents Dir// contain the path to the html documents directory. The HTTP Port is 80 by default. In this case it is sufficient to enter the IP address of the V-Control system in the browsers address field. If the web service is not available, check the firewall configuration of the computer or try another port. If  another port than 80 is used, the port number has to be added to the URL (e.g. http://​192.168.1.5:​8080) if Port 8080 is used alternatively. //Documents Dir// contain the path to the html documents directory.
  
-=== RS232 Remote ===+==== RS232 Remote ​====
 If there is no network available, it is possible to use a RS232 connection. The RS232 service uses the same protocol than TCP or UDP services. If there is no network available, it is possible to use a RS232 connection. The RS232 service uses the same protocol than TCP or UDP services.
  
  
 {{::​options5.png|}} {{::​options5.png|}}
-==== The Script Editor Page ====+===== The Script Editor Page =====
 {{:​options2.png|}} {{:​options2.png|}}
  
 This dialog is used to configure the Script Editor This dialog is used to configure the Script Editor
  
-  * Color Syntax: Switch Color Syntax on / off +  ​* **Color Syntax:** Switch Color Syntax on / off 
-  * Keywords: Basic keywords are marked blue +  ​* **Keywords:** Basic keywords are marked blue 
-  * Numbers and Strings: These values marked green. +  ​* **Numbers and Strings:** These values marked green. 
-  * Remarks: Code lines containing // are marked red from the occurrence of the // letters +  ​* **Remarks:** Code lines containing // are marked red from the occurrence of the // letters 
-  * Textsize: The size of the font +  ​* **Textsize:** The size of the font 
-  * Font: The type of the font+  ​* **Font:** The type of the font
  
options.txt · Last modified: 2018/06/25 08:44 by admin